Hinged Frame Modular Connector HF10A for single Modular suit for H10A Hood and Housing 09140000304

Hinged Frame Modular Connector HF10A for single Modular suit for H10A Hood and Housing 09140000304

SMICO Modular Hinged Frame HM Connectors enable the integration of Modular components into HM connectors and are designed to handle more than 10,000 mating cycles. The Hinged Frame HM sets itself apart from conventional hinged frames through its PE contact. The contact is specially plated and boasts increased fixation stability in the connector frame. Because the Han HM housing is executed with IP65 protection, the SMICO Modular Hinged Frame HM series provides additional application fields for Han-Modular. Not only can Modular connectors be plugged and unplugged many thousand times, but the modules in HM housings are also well-protected against mechanical loads, contact and dust accumulation, and water spray.

• Enable the integration of Han-Modular components into Han HMC connectors
• Protection against mechanical loads, contact and dust accumulation, and water spray
• Specially plated contact offers increased fixation stability in the connector frame
• >10,000 mating cycles

The module heavy-duty connector is one of the SMICO heavy-duty connectors. Many customers do not guide how to install the module heavy-duty connector. Let's take a look at the correct installation method.
Materials needed: frame, module
Step 1: Loosen the screws on the left and right sides of the metal frame
Step 2: After the screws are loosened, the metal frame can be opened so that the module can be put in
Step 3: Put the module into the frame so that the protrusions on both sides of the module are put into the holes on both sides of the metal frame
Step 4: After placing the required modules, re-tighten the screws
The heavy-duty connector of the module is installed. If there is a shell outside, then put the whole frame into the shell and fix it.