18 Pin Heavy Duty Connector HDC 16B Hood and Housing
- Part:
- SO-HK-006.2/12-F(6-10mm2)
- Number of contacts:
- 6/12PINS
- Rated current:
- 40/10A
- Rated voltage conductor:
- 690V/230/400V
- Product Certification:
- UL CUL CE ROHS DMT
- Order No.:
- 09380182702
- Packaging Details:
- Standard Export Cartons
- Delivery Time:
- Within 7 Days
- Payment Terms:
- L/C, T/T, Western Union, Paypal
- Supply Ability:
- 100000 pcs per month
Description
Industrial machinery requires streamlined wiring to run power and signal lines through a single interface. The 18 pin heavy duty connector satisfies this requirement through a combination insert seated inside a rugged 16BHood/Housing. This design isolates heavy electrical loads from sensitive feedback lines, preventing electromagnetic interference across plant floors.
Performance Highlights of the HDC System
Consolidating multiple lines into a single enclosure delivers immediate field advantages:
-
Power and Signal Hybridization: The hdc 18 pin arrangement handles 40A power feeds alongside 10A control signals.
-
Tool-Free Servicing: Wiring the connector 18 pin assembly uses screw terminals, eliminating specialized crimping dies.
-
Harsh Environment Sealing: Die-cast aluminum alloy shells and NBR gaskets block moisture and industrial oils.
Technical Parameters
| Parameter | Specification |
|---|---|
| Contact Arrangement | 6 Power + 12 Signal |
| Rated Current | 40A (Power) / 10A (Signal) |
| Rated Voltage | 690V (Power) / 230V (Signal) |
| Wire Cross Section | 6.0–10.0 mm² / 0.5–2.5 mm² |
| Termination Type | Screw Terminal |
| Enclosure Protection | IP65 / NEMA 4 |
Choosing a heavy duty connector 18 pin configuration prevents cabinet clutter while maintaining stable current distribution.
Wiring and Enclosure Installation
Assembly Guidelines for Industrial Enclosures
Reliable operation depends on proper mechanical execution:
-
Strip power conductors to 12 mm and signal lines to 7 mm.
-
Tighten screws to recommended torque ratings to ensure vibration resistance for the 18 pin hdc insert.
-
Fasten the 18 pin connector hood using side stainless steel locking levers.
Each industrial heavy duty connector provides dependable conductivity under continuous mechanical vibration.
Specification
HK-006.2/12-F(6-10mm2) Heavy Duty Rectangular Connector 09380182702 Screw terminal 40A/10A
Heavy duty connector HK series inserts combination of power and signal area in one connector,Screw termination for power and signal area, it's used in the power combination boxes for plug socket .
6+12 Poles + PE, 40/10 A Female Screw Terminal :
| Inserts | Suitable Shell:16BHood/Housing | ||||||||||||||
| Number of contacts | 6/12 | ||||||||||||||
| Electrical data acc. to EN 61 984 | |||||||||||||||
| Power area | |||||||||||||||
| ---Rated current | 40A | ||||||||||||||
| ---Rated voltage | 690V | ||||||||||||||
| ---Rated impulse voltage | 6kV | ||||||||||||||
| ---Pollution degree | 3 | ||||||||||||||
| Signal area | |||||||||||||||
| ---Rated current | 10A | ||||||||||||||
| ---Rated voltage | 230/400V | ||||||||||||||
| ---Rated impulse voltage | 4kV | ||||||||||||||
| ---Pollution degree | 3 | ||||||||||||||
| Rated voltage acc. to UL/CSA | 600/300V | ||||||||||||||
| Insulation resistance | ≥1010Ω | ||||||||||||||
| Material | polycarbonate | ||||||||||||||
| Limiting temperatures | -40℃...+125℃ | ||||||||||||||
| Flammability acc. to UL 94 | V0 | ||||||||||||||
| Mechanical working life(mating cycles) | ≥500 | ||||||||||||||
| Contacts | |||||||||||||||
| Power contacts | |||||||||||||||
| ---Material | copper alloy | ||||||||||||||
| ---Surface | hard-silver plated | ||||||||||||||
| ---Contact resistance | ≤0.3mΩ | ||||||||||||||
| ---Screw terminal | |||||||||||||||
| ------geometric wire gauge | 6-10mm² | ||||||||||||||
| ------AWG | |||||||||||||||
| ---Tightening tourque | |||||||||||||||
| ------mm² |
|
||||||||||||||
| ------N.m | |||||||||||||||
| ---Stripping length | 14mm | ||||||||||||||
| Signal contacts | |||||||||||||||
| ---Material | copper alloy | ||||||||||||||
| ---Surface | hard-silver plated | ||||||||||||||
| ---Contact resistance | ≤1mΩ | ||||||||||||||
| ---Screw terminal | |||||||||||||||
| ------mm² | 0.2-2.5mm² | ||||||||||||||
| ------AWG | 26-14 | ||||||||||||||
| ---Tightening tourque | 0.5Nm | ||||||||||||||
| ---Stripping length | 7.5mm | ||||||||||||||
SMICO heavy duty connector can match the following interchangeable.
The hood and housing for H24B .
| Suppier | Plug insert | Socket insert |
| SMICO | SO-HK-004/8-M | SO-HK-004/8-F |
| H | 09380122601 | 09380122701 |
| ILME | CXM 4/8 | CXF 4/8 |
| TE | T2100122101-000 | T2100122201-000 |
| LAPP EPIC | ||
| PHOENIX | ||
| MOLEX | ||
| WEIDMULLER | HDC S4/8 MS | HDC S4/8 FS |
| WIELAND | 72.216.1253.0 | 72.206.1253.0 |
| AMPHENOL |
Advantage
SMICO heavy duty connector
-
Compatible with other brands
-
accept OEM /ODM
-
accept customized colour : like blue ,black
-
The popular parts in stock , delivery time fast
-
Export Packing : Packing for each items respectively or packing for full one set
-
Without MOQ except the customized type
Location
SMICO Heavy duty connectors Applications :
- Machinery
- Automation
- Robotics
- Rail
- Energy Distribution
- Renewable Energy
- Construction Machinery
- Professional Light and Sound
Packaging
Videos
Downloads
| HK-006.2/12-F(6-10mm2) Heavy Duty Rectangular Connector 09380182702 Screw terminal 40A/10A | Download |
FAQs
01.How many employees are there in your factory?
We have more than 130 employees, including the entire production chain.
02.Whether to provide technical documents?
Sure. If there is anything unclear about the product, we will provide you with as detailed technical documents as possible.
03.Does this insert can fit with my frame?
Our module insert can fit with Harting,ILME,Weidmuller,TE and other brand.
04.How to order?
Please email us your purchase order and we will send you a quotation and a proforma invoice.
