Application Of Industrial Connectors In Data Center Industry

Heavy Duty Connector is widely used in data centers. connector heavy duty is a commonly used connector. For general low-load equipment such as 16A current, most data centers choose relatively cheap wall sockets and plugs to match. heavy duty 2 pin connector must be used for 32A and above equipment to ensure the safety and reliability of power distribution.

In data centers, 3-core or 5-core heavy duty connector 16 pin are generally used, and the difference in use is mainly load capacity. heavy duty connector 5 pin is generally used for cabinets below 10kW. On industrial plugs, E, L, and N respectively represent: E is the ground wire (PE protection wire), L is the live wire (phase wire), and N is the zero wire (neutral wire). heavy duty connector 6 pin can be used for 30kW large-capacity cabinets, and the five cores are L1, L2, L3, E, and N respectively.

The power supply is connected to the manifold from the UPS, and then the manifold connects the power cable to each cabinet through a micro-break.

However, due to the particularity of power distribution in data centers, as the load level of cabinets continues to increase, higher requirements are placed on the heating, safety and reliability of heavy duty electrical contacts.