Cold Press Needle Crimper Operation When Inserting The Cold Press Needle Tip
Publish Time: Author: Site Editor Visit: 6
Insert the stripped copper wire core completely into the metal sleeve of the cold-pressing needle. When using contact crimping tool, first strip the insulation layer from the end of the wire to expose the appropriate length of copper wire core.
After inserting the copper wire core, place the crimping tool in the fitting slot of the sleeve and align it with the needle. Apply pressure slowly, closing contact crimper until the mating part between the sleeve metal and the copper wire core is closed.
Observe the crimped area to confirm there is no gap between the metal sleeve and the copper wire core. Gently pull the wire; if it feels tight, disconnect d sub contact crimper.
