Common Faults And Solutions For Heavy-duty Connectors

1. Poor Quality.

Inferior sockets have insufficient copper clamping force, leading to poor contact between the socket and plug. heavy duty multi pin connectors After prolonged use, the socket and plug will become hot. The reason for the above problems is often due to a lack of awareness of the safety of heavy connector. When purchasing heavy duty cable connectors, they bought a counterfeit product at a low price.

Solution: Purchase genuine heavy power connector from authorized stores or supermarkets designated by the manufacturer whenever possible.

2. Insufficient Capacity.

Generally, it is required that the rated current of the heavy duty wire connectors socket should not exceed the rated current of the socket. In other words, it should not be "underpowered," otherwise it will overheat, shorten its service life, damage the wire connector heavy duty socket, or even cause a fire.

Solution: Do not use high-power appliances simultaneously on one socket. Ordinary sockets are labeled with their rated voltage and current; carefully check this when purchasing.

3. Hygiene Hazards.

The contact resistance between the plug and socket increases due to oxidation or oil contamination of the plug. High power loads can cause the plug to overheat.

Solutions:
1. Clean the heavy duty electric cable connectors plug frequently to prevent dust and rust at both ends; sand severely oxidized plugs or replace them with new ones.

2. Loose connection between socket and plug.

Loose wiring between the socket and plug increases the contact resistance of the heavy duty automotive electrical connectors, causing it to overheat.

Solution: Securely install the wires.