Detailed Explanation Of Heavy-duty Connector Electrical Parameters And Selection Guide

Use a conductive heavy duty electrical contacts housing so that the shielded cable can be connected. When using a round heavy duty industrial connector, the cable shield should be carefully introduced to the shield end heavy duty male female connector. Therefore, it is best to have a full-angle connection of 360 degrees. If the shield is tightly connected to the conductive heavy duty multi pin connectors housing, a good (practical enough) shielding value can be achieved.

The plastic heavy connector has no metal housing and the cable shield cannot be connected directly, so it is very important to connect the heavy duty cable connectors plug to the socket and make it well connected to the heavy power connector housing.

The shielding attenuation curve here is given in decibels and is related to the heavy duty wire connectors frequency. A good shielding has a higher shielding attenuation, which does not drop significantly over a large frequency range.