Function Description Of Internal Components Of Heavy-duty Connector

U-shaped plates are symmetrically arranged in the mounting slots on the right side of the front and rear surfaces of the heavy duty electrical connectors housing. The interior of the U-shaped plates is rotatably connected to the insertion plate via a pivot. Four springs are symmetrically arranged in the mounting slots on the right side of the front and rear surfaces of the heavy duty power connectors housing. Triangular clamps are evenly distributed on the outer side of the plates, and anti-slip pads are provided on the right side of the triangular clamps. Anti-slip grooves are evenly distributed on the right side of the outer side of the insertion plate to meet the insertion requirements of heavy duty connector 24 pin. The connection structure of 16 pin heavy duty connector includes copper pillars, a second spring, sliders, and a top plate. Copper pillars are evenly arranged on the front and rear inner walls corresponding to the insertion holes of 24 pin heavy duty connector; evenly distributed sliders are slidably connected in the sliding grooves symmetrically arranged on the upper and lower inner walls of the three jacks. The lateral adjacent inner sides of the two sliders of 4 pin heavy duty connector are fixedly connected to the left and right ends of the top plate; two springs are symmetrically installed on the two sliding grooves on the upper and lower inner walls of the three jacks. The outer ends of the two springs of 6 pin heavy duty connector are fixedly connected to the corresponding inner arc surfaces of the top plate to avoid poor contact when the equipment shakes. The top plate is a brass top plate, which clamps the input plug to a certain extent. The mounting plate has symmetrical mounting holes at both the front and rear ends, which can further enhance the stability of the connector heavy duty shell and bolts.