Heavy-duty Connector Interface Connection And Plug-in Interface Connection Methods

Interface Connection

Currently, the heavy power connector connection method is popular, allowing heavy duty wire connectors interfaces to connect to each other, and also allowing wire connector heavy duty interfaces to disconnect. Connecting two simple electrical components is also very common. For heavy duty electric cable connectors connections via a locking button, the correct locking position of the locking button is marked on the button itself. Customers can check if the locking button is installed in the small round hole on the side of the heavy duty automotive electrical connectors nut.

Plug In

The plug-in interface mode is a widely used interface mode. The heavy duty 12v connectors power plug and socket can be held in place by horizontal movement during connection and disconnection, without twisting or mating, and can be connected and disconnected quickly. It generally has two structures: steel ball and cotter pin. This interface eliminates the traditional mechanical combination lock mechanism, so if heavy duty 12 volt connectors is mistakenly plugged in, it is very difficult to pull out.