In Which Environments Do Industrial Connectors Need To Be Used And What Are The Requirements?

1.Heavy Duty Connector Type:

What to connect, where to use, etc. are all things to consider first, which determines the type selected. heavy power connector The place of use (indoor, outdoor, corrosive environment, etc.) will affect whether to enhance the airtightness of the aviation plug or add a shielding shell to the insulator. heavy duty wire connectors type determines which terminal to use and how many conductive terminals are arranged. Of course, some technical references to the terminal are also involved.

2. Environmental requirements:

Temperature, humidity and other environmental conditions are determined by the location of the wire connector heavy duty, so the location and expected environment should be considered. And the applicable period and information of other relevant storage conditions. The description of the environment should also cover the requirements for shock and vibration, including the requirements for sea transportation, and the requirements for production environment conditions, such as welding temperature and the duration of the welding cycle. According to the heavy duty electric cable connectors manufacturer, the area where the temperature is generated is around the bus continuous current guided by heavy duty automotive electrical connectors.

3. heavy duty 12v connectors Electrical requirements:

When selecting an electrical connector, consider the electrical requirements of the product. What are the product's requirements for voltage and current, and can the connector be well applied to such electrical characteristics? These electrical requirements need to be considered. In addition, we also need to test some other electrical conditions: resistance, allowable resistance change, voltage drop, high current value, voltage value, surge current value, characteristic impedance, (voltage standing wave ratio), insertion loss and shielding efficiency.

5. Mechanical performance requirements:

For connectors, what kind of volume and coverage area are effective, what is the allowable dimensional tolerance; what is the plug-in and pull-out force of the terminal; what is the durability of the corrugated connector (plug-in and pull-out frequency)? When selecting electrical connectors, these factors should be considered. For example, for printed circuit boards, it is very important to determine the tolerance of the circuit board, which is the critical value of the card edge connector and the feasibility of reaching the critical value. For low-power circuits, the coating and bottom materials must be marked to meet the signal standard and environmental level.

How to choose the right electrical connector is far more than that. The above content is just some questions, but the factors in a general sense cannot cover all.