Installation And Wiring Of Heavy-duty Connector Plugs And Sockets

heavy duty electric cable connectors Plug and Socket Installation and Wiring:

1) Select the appropriate heavy duty automotive electrical connectors specification and model based on the total current of the heavy duty 12v connectors load, installation method, and application location.

2) Unpack the package and remove the heavy duty 12 volt connectors switching power plug and socket.

3) Open the 12v heavy duty connector cover plate, use a Phillips screwdriver to remove the four fixing screws, remove the fixing screws from the clip, and remove the heavy duty crimp connectors clip plate.

4) Pass the cable that must be connected through the hole wall of the end cover. Strip an appropriate length of the cable sheath rubber material, exposing about 11mm of the cable copper core. Determine the cable connection method, tighten the power cord with the small screws, and plug or insert the cable.

5) Install the heavy duty waterproof electrical connectors clip plate, secure the cable, cover with the sleeve, and tighten the four fixing screws.