Maintenance Process Of Cold Press Pin Crimper

During the maintenance of contact crimper, personal protection and equipment isolation should be implemented first. Insulated gloves and goggles should be worn and power should be cut off and locked. After clearing the debris in the crimping room, clean the die and slide rail with a soft cloth or brush and regularly add lubricant to the moving parts of d sub contact crimper according to the manufacturer's instructions. Visual inspection should be carried out every shift or every 500 operations, and the condition of the die profile, needle withdrawal mechanism and fasteners should be recorded. If wear or deviation is found, replace or calibrate immediately (according to the manufacturer or calibration plan, annual calibration or calibration after reaching the specified workload is usually recommended). Establish maintenance and repair files, and conduct on-the-job training and sampling quality inspections for operators. This will ensure the maximum crimping quality of contact crimping tool and reduce equipment failures and personal risks.