Quick Connection Access Device On Emergency Power Generation Vehicle - Heavy-duty Connector Single-core High-current Connector Application Scenario Introduction

Keywords: high current heavy duty 2 pin connector, emergency generator low voltage quick access device, coupler panel socket, emergency power supply, quick connector, power heavy duty connector 16 pin
With the continuous development of society, there is an urgent need for uninterruptible power supply in many public places, production and service fields, as well as many fields related to safety. Power suppliers generally use emergency power supply equipment and are equipped with mobile power generation equipment. When encountering unexpected power outages caused by technical failures or natural disasters such as lightning strikes, it is urgent to ensure power supply. Time is money. At this time, emergency power generation equipment suppliers are needed to ensure power supply. Power suppliers need reliable, high-performance and easy-to-operate quick-connect access devices--------single-core high current heavy duty connector 5 pin.
During the operation of the power system, when there is a power outage due to a fault or maintenance, in order to meet the demand for rapid power supply, it is necessary to use an emergency power supply vehicle for power supply. When the emergency power supply vehicle arrives at the scene, the staff needs to open the heavy duty connector 6 pin low-voltage incoming line and high-voltage incoming line switches, hang the heavy duty electrical contacts grounding wire, and then remove the bolts on the low-voltage busbar before entering the cable incoming line for power generation. However, if the distance between the power supply vehicle and the power discharge is relatively long, the cable connection time is relatively long, and it is impossible to quickly and safely connect with the user end. Moreover, the existing mode is that when encountering a power outage due to a fault or maintenance, the emergency charging source needs to remove the copper plate and then connect it with bolts, which is inefficient and unsafe. Therefore, the single-core high-current heavy duty industrial connector was developed to achieve the function of quick plug-in connection, heavy duty male female connector improve the power supply and power conservation efficiency, and can be connected to the emergency power generation vehicle more safely and conveniently, heavy duty multi pin connectors improve the user's ability to respond to sudden power outages and improve the power supply service level of the power company.