Several Points Should Be Noted When Using Heavy-duty Connectors.

heavy duty connector 16 pin Termination: Termination and inspection must be strictly performed according to the corresponding termination standards and contact numbers. The maximum insulation thickness between the selected cables should match the distance between the contactors, and the cable core should match the contactor terminals.

heavy duty connector 5 pin Welding: A soldering iron with appropriate power should be selected based on the bare wire diameter. The welding time for each contactor should generally not exceed 3 seconds. Care should be taken to prevent flux from seeping into the insulation, which could reduce the insulation resistance.

heavy duty connector 6 pin Cleaning: Contact cleaning can be done by wiping with a cloth dampened with anhydrous ethanol and drying before use. Chemical solvents such as toluene, which have harmful effects on heavy duty electrical contacts, must not be used.

heavy duty industrial connector When not plugged in, each contact must be covered with its matching dust cover or other dustproof measures must be taken.

Only by mastering the correct usage of heavy duty male female connector can one avoid pitfalls and errors in actual use. However, this requires everyone to have a high-quality, high-performance heavy duty multi pin connectors.