Six Key Points To Pay Attention To When Using Cold Press Needle Crimpers

We all know the principle of contact crimper, and the wire processing harness products are usually composed of two terminal blocks or connectors. The purpose of the harness assembly is to ensure electrical continuity. If one of the three components of d sub contact crimper is missing, the current cannot flow normally. Now, we will introduce six key points that need to be paid attention to when using contact crimping tool.

1. Are the wire diameter of the crimping machine wire and the applicable size of the terminal block the same?

2. Are the length of the crimping part of the crimping machine conductor and the wire stripping size the same?

3. Is there any damage or breakage of the core wire at the crimping machine stripping? If there is a break, follow the instructions of the superior.

4. Is the conductor height within the tolerance of the indicated value when the crimping machine is crimping the terminal, and is it punched in the center of the indicated value?

5. Is there any flying wire between the insulator punching part and the conductor punching part?

6. Is the bell mouth at both ends? If it is on one side, it must be on the insulation side.

The above is an introduction to the six key points that need to be paid attention to when using the crimping machine. Understanding these can help us use it better. I hope everyone can understand it.