Some Methods To Improve Terminal Block Failure

In view of the touch failure modes exposed in the process of push connector block R&D, experiment and application, adopting some push fit connector block improvement methods can achieve certain results. In terms of push fit terminal structural design and application of auxiliary agents, these methods are summarized as follows: reinforcement method, calibration method, balancing method, coating lubrication method and optimization method, etc.
push fit terminal block connector Reinforcement method
push in connector block Reinforcement method refers to the use of adding reinforcing ribs, not slotting or opening narrow slots to push in terminals with clamping screws reinforce the parts where the outer conductor or inner conductor of push in wire terminal block is prone to touch failure without affecting the electrical characteristics of push wire terminal block (such as voltage standing wave ratio, insertion loss), so as to improve the rigidity and mechanical strength of the failure part, and improve its touch reliability and mechanical life.