Some Protective Measures To Be Taken When Using Cold Press Needle Crimpers

contact crimper is a necessary tool for the power industry to crimp wires during line infrastructure construction and line maintenance. In order to ensure the safety of operators and the normal operation of equipment, a series of protective measures must be taken when using d sub contact crimper. The following are some protective measures that need to be taken when using contact crimping tool.

1. Preparation before use

1.1 Ensure the normal use of the equipment

Before using the crimping machine, it is necessary to check whether the connection of each part of the equipment is firm, whether the power plug and socket are in good contact, and whether there is any abnormal noise and odor. Ensure that the equipment is in normal working condition.

1.2 Choose a suitable crimping head

Choose a matching crimping head according to the specifications and models of the wires to be crimped. A suitable crimping head can ensure the quality of crimping and avoid safety hazards caused by improper crimping.

1.3 Prepare tools

Prepare tools and equipment such as wrenches, insulating gloves, insulating blankets, rubber pedals, etc. for crimping machines. These tools and equipment can provide additional protection during operation.

2. Precautions during operation

2.1 Wear appropriate protective equipment

When operating the crimping machine, protective shoes, safety helmets, insulating gloves and other protective equipment must be worn. These protective equipment can effectively prevent accidental injuries that may occur during operation.

2.2 Handling wires

When performing crimping operations, you need to pay attention to the following matters when handling wires:

Follow standard operating procedures and follow the correct wire wiring sequence.

The surface of the wire must be cleaned before operation.

Tie the wires tightly to ensure that they will not move.

Confirm whether the length of the wire is appropriate.

2.3 Debugging various parameters

Before debugging various parameters, you need to turn off the power switch of the crimping machine and perform the following checks:

Confirm whether the crimping head has been disassembled.

Check whether the power supply voltage is stable.

2.4 Crimping operation

During the crimping operation, the following operating procedures must be followed:

The crimping head must be close to the wire and cannot move.

When an abnormal sound occurs during operation, the operation must be stopped immediately to check the cause.

During the operation, you must not leave the site.

2.5 Processing after crimping

After crimping, the following processing is required:

When disassembling the crimping head, you must follow the required disassembly direction in sequence, and never force disassembly.

Loosen the crimping wire, conduct a quality inspection, and mark the wire immediately.

3. Precautions

3.1 Check the equipment regularly

Check the crimping machine regularly to confirm whether all functions are normal. Regular maintenance can extend the service life of the equipment and ensure the safe operation of the equipment.

3.2 Prevent hand injuries

Do not insert your hands into the lower pressure chamber, otherwise an accident will occur. During the operation, you must keep your hands away from the crimping area to ensure your hand safety.

When using the crimping machine, follow the relevant operating procedures to ensure the safety of the operator and the operation and stability of the equipment. By taking the above protective measures, you can effectively prevent possible accidental injuries during operation and ensure the smooth progress of the crimping work.