Teach You How To Correctly Connect The Industrial Hot Runner Socket

How to use heavy power connector? First, you need to understand its basic connection operation so that you can use it correctly.

1. Check heavy duty wire connectors first, check whether the internal jack or pin is intact, and whether there is any excess inside.

2. Then check the socket. Similarly, check whether the internal socket or pin is intact and whether there is any excess inside.

3. After checking, confirm whether wire connector heavy duty is of the same type and quantity.

4. Hold the socket flange with your left hand, hold heavy duty electric cable connectors with your right hand facing the socket, and connect the large protrusion on the inner edge of heavy duty automotive electrical connectors with the large notch on the inner edge of the socket.

5. Hold the socket flange with your left hand, face the socket direction with your right hand, and screw heavy duty 12v connectors in clockwise with even force.

6. When heavy duty 12 volt connectors presses the red line mark on the outside of the socket, it means that the connection is in place.

Note:

● It is forbidden to use brute force to connect the plug. Please exit and reconnect when it cannot be connected.

● Do not grab the rear cover of the plug or socket when connecting to prevent the rear cover from loosening or being physically damaged.