Use A Cold-press Crimping Tool To Fully Insert The Wire Core Into The Metal Sleeve.

Push the stripped insulation core axially to the bottom of the metal sleeve until the end of the core is flush with the inner bottom surface of the sleeve. Then firmly hold step contact crimper, keeping the metal sleeve and core axially aligned, and gently push until no gaps are visible.

Immediately initiate step d sub contact crimper to ensure full contact between the metal wall of the sleeve and the stranded core.

No external lubricant or filler is required during step contact crimping tool; simply ensure the core is clean, free of oxidation, and its cross-section conforms to the sleeve specifications.