6 Pin Heavy Duty Connector HDC Industrial Multi Pin
- Part:
- SO-HE-006-MS
- Number of contacts:
- 6
- Rated current:
- 16A
- Rated voltage conductor:
- 500V
- Product Certification:
- UL CUL CE ROHS DMT IEC-61984
- Order No.:
- 09330062616
- Packaging Details:
- Standard Export Cartons
- Delivery Time:
- Within 7 Days
- Payment Terms:
- L/C, T/T, Western Union, Paypal
- Supply Ability:
- 100000 pcs per month
Description
Industrial automation systems demand reliable electrical interconnects capable of surviving severe mechanical stress and chemical exposure. Integrating a 6 pin heavy duty connector into control cabinets prevents unexpected signal drops and power failure across automated production lines.
Mechanical Advantages of the 6BHood/Housing Assembly
Selecting a heavy duty connector 6 pin configuration eliminates premature wiring degradation in high-vibration machinery. The die-cast aluminum 6BHood/Housing features a corrosion-resistant powder coating and stainless steel locking levers, preventing accidental disconnection during active motor operation.
-
Environmental Sealing: Nitrile rubber gaskets achieve an IP65 ingress protection rating, blocking conductive dust and high-pressure water jets.
-
Low Contact Resistance: Silver-plated copper alloy pins maintain contact resistance below 1 milliohm, minimizing thermal dissipation under full current loads.
-
Rapid Installation: Screw and crimp termination options reduce cabinet wiring time by 40% compared to hardwired junction boxes.
Electrical Specifications and Performance Ratings
When evaluating a 6 pin hdc for power distribution, verifying voltage clearance and insulation displacement parameters ensures compliance with IEC 60664-1 standards. The table below outlines the operational limits of the insert module.
| Parameter | Specification |
|---|---|
| Rated Current | 16 A |
| Rated Voltage | 500 V AC/DC |
| Impulse Withstand Voltage | 6 kV |
| Insulation Resistance | Greater than 10 GΩ |
| Operating Temperature | -40°C to +125°C |
| Mating Cycles | Minimum 500 |
| Flammability Rating | UL94 V-0 Polycarbonate |
Field Deployment Protocol for Industrial Multi Pin Interconnects
Proper assembly of hdc 6 pin units guarantees dielectric strength and sealing integrity across robotic cells, wind turbines, and rail traction systems.
Cable Preparation and Contact Termination
-
Strip the outer cable jacket to 22 mm and expose 7.5 mm of individual copper conductors without nicking strands.
-
Insert wires into the connector 6 pin terminal cavities and tighten clamping screws to a 0.5 Nm torque specification.
-
Verify wire retention strength before sliding the insert into the protective shell.
Enclosure Mounting and Sealing Verification
-
Thread the PG16 or M20 cable gland onto the entry port to secure strain relief.
-
Align the polarized guide pins on the 6 pin connector and engage the dual locking latches until audible clicks confirm full seating.
-
Inspect heavy duty multi pin connectors for uniform gasket compression before energizing the circuit, or request a technical datasheet and volume quote for custom panel configurations today.
Specification
Heavy Duty Connector 6pin 16A Quick Cage-Clamp Push in HE-006-MS rectangular connector 09330062616
Heavy Duty Connector Cage-clamp terminal 6pin male insert- -SMICO Connectivity 6pin HE-006-MS ,16A used for industrial robot ,various harness field
6 Poles+PE,16A,Cage-clamp male insert
| Inserts | Suitable Shell:6BHood/Housing |
| Number of contacts | 6 |
| Electrical data acc. to EN 61 984 | |
| ---Rated current | 16A |
| ---Rated voltage conductor | 500V |
| ---Rated impulse voltage | 6kV |
| ---Pollution degree | 3 |
| ---Pollution degree 2 also | 16A 400/690V 6kV 2 |
| Rated voltage acc. to UL/CSA | 600V |
| Insulation resistance | ≥1010Ω |
| Material | polycarbonate |
| Limiting temperatures | -40℃...+125℃ |
| Flammability acc. to UL 94 | V0 |
| Mechanical working life(mating cycles) | ≥500 |
| Contacts | |
| Material | copper alloy |
| Surface | hard-gold plated |
| hard-silver plated | |
| Contact resistance | ≤1mΩ |
| Screw terminal | |
| ---Wrie gauge | 0.14-2.5mm2 |
| ---AWG | 26-14 |
| ---Tightening/Test torque | 0.5N·m |
| ---Stripping length | 7.0mm |
SMICO heavy duty connector can match the following interchangeable.
The hood and housing for H6B .
| Suppier | Plug insert | Socket insert |
| SMICO | SO-HE-006-M | SO-HE-006-F |
| H | 09330062601 | 09330062701 |
| ILME | CNEM 06 T | CNEF 06 T |
| TE | ||
| LAPP EPIC | 10.1900 | 10.1910 |
| PHOENIX | 1648115 | 1648128 |
| MOLEX | ||
| WEIDMULLER | HDC HE 6 MS | HDC HE 6 FS |
| WIELAND | 70.310.0602.0 | 70.300.0602.0 |
| AMPHENOL |
Advantage
SMICO heavy duty connector
-
Compatible with other brands
-
accept OEM /ODM
-
accept customized colour : like blue ,black
-
The popular parts in stock , delivery time fast
-
Export Packing : Packing for each items respectively or packing for full one set
Location
SMICO Heavy duty connectors Applications :
- Machinery
- Automation
- Robotics
- Rail
- Energy Distribution
- Renewable Energy
- Construction Machinery
- Professional Light and Sound
Packaging
Videos
Downloads
| Heavy Duty Connector 6pin 16A Quick Cage-Clamp Push in HE-006-MS rectangular connector 09330062616 | Download |
FAQs
01.How many employees are there in your factory?
We have more than 130 employees, including the entire production chain.
02.Whether to provide technical documents?
Sure. If there is anything unclear about the product, we will provide you with as detailed technical documents as possible.
03.Does this insert can fit with my frame?
Our module insert can fit with Harting,ILME,Weidmuller,TE and other brand.
04.How to order?
Please email us your purchase order and we will send you a quotation and a proforma invoice.
