Application Of Conventional Plug-in Push-in Terminal Blocks In Gate Controllers

Compared with previous years, the current electrical connection method has undergone a qualitative change. Stripping-merging wires-wrapping tape is the conventional operation of early wiring. If a large number of wires are to be connected, it will waste a lot of time, and this wiring style makes inspection and maintenance difficult; now, the operation can be completed by pressing the cold-pressed end, inserting the wire, and connecting the push connector block row. push fit connector block has an inspection hole, which provides great convenience for later maintenance.

The gate controller is an intelligent multi-functional manual and wireless remote control dual-purpose remote control device designed with digital technology. It has good intelligent judgment function and high reliability. It is the preferred automatic control device in the current electric gate system.

The gate control panel controls the motor to reverse forward according to the operation instructions. The motor drives the reducer input shaft to rotate. The reducer then reduces the output shaft and drives the rocker arm to rotate up and down 180° in the second half of the circle. The rocker arm of the reducer drives the drive arm to move up and down within the range of 90° in the second half of the circle through the lower joint bearing, connecting rod, and upper joint bearing. The main shaft drive arm drives the gate rod connected to the main shaft to move up and down within the range of 90° horizontally and vertically.

The switch operation of the controller includes high and low sensitivity, vehicle passing drop bar, counting drop bar, anti-collision rebound, normal operation mode, automatic control mode and other operations. The internal push fit terminal connection needs to be coordinated with multiple push fit terminal block connector.