Kunming Crimping Machine Crimping Process And Dehumidification Method

Fully automatic wiring harnesses are usually used to disconnect cables and stock or transport them to other locations in the factory. Bundled sales, or bundle the cable ends from the harness, can be bent, barbed. If contact crimper is damaged, the tightness needs to be adjusted, the friction wheel, just keep the end reel from expanding due to weight. During the binding period, a smaller harness needs to be used, or the handling procedure needs to be improved.

How to dehumidify:

1. Use an air conditioner to drain the moisture. Most air conditioners now have this function. Turning on the air conditioner dehumidification function can effectively solve the problem of room humidity on rainy days, and also form a full range of protection for the fully automatic wiring harness.

2. When d sub contact crimper is not used in the factory, it is recommended to make a protective cover, which can effectively prevent the back of the appliance from contacting humid air. At the same time, you can also increase the frequency of using these appliances, because the machine will generate heat when working, and can effectively dehumidify. If the computer cannot be displayed due to moisture, it can be turned on and powered on. Generally, it will be displayed for about 10 minutes and can be restarted.

3. If the humidity outside is too high, be sure to close the doors and windows. If the indoor humidity is too high, ensure that the room is ventilated. Air conditioning and fans can be used to dehumidify.

4. If there are sweat stains on the wall, it is recommended to buy a dehumidifier to dehumidify. It is recommended to use an industrial dehumidifier.

5. In areas with long-term humidity, you can place charcoal indoors or lay bamboo charcoal under the indoor floor, which has a good effect on balancing the humidity in the room, preventing dust, and purifying the air. Generally, factories recommend laying cartons.

6. Put some quicklime (add some sand) in the relatively humid corners.

The above content is about the crimping process and dehumidification method of contact crimping tool. I hope it will be helpful to you after reading it. Since some of the content comes from the Internet, it is for reference only.