Precautions For Installing Heavy-duty Connectors And Connector Salt Spray Issues

Two mounting screws are used during installation, and the installation method is rear-mounted. The heavy duty industrial connector socket needs to be fixed to the mounting plate. The rectangular sealing ring on the heavy duty male female connector socket is pressed tight by the mounting screws, which serves to seal and waterproof it. At the other end of heavy duty multi pin connectors, use a waterproof clip to secure the plug of heavy connector, with the plug installed inside the waterproof clip. The mounting screws at both ends of the clamp pass through the heavy duty cable connectors plug, and the mating end of the waterproof clamp is equipped with a large sealing ring.

When the plug and socket are connected, the mounting screws at both ends of the clamp engage with the internal threads of the hexagonal mounting screws on the panel, and the heavy power connector plug and socket are inserted under the action of the mounting screws; at the same time, the rectangular sealing ring at the connection end of the waterproof clamp is pressed by the mounting panel, realizing the sealing and waterproof function of the heavy duty wire connectors connection interface.