Reduce Carbon Emissions, Improve Energy Efficiency, Push-in Terminal Blocks Promote Green And Sustainable Development

push in terminal block Although they rarely appear in the public eye, push in din rail terminal blocks is almost everywhere. push fit din rail terminals From industrial pumps, fans and conveyor belts in manufacturing, and propulsion systems in transportation vehicles, to compressors in electrical equipment and HVAC systems in buildings, push fit terminal block provides power connections for a large number of basic applications and scenarios in modern life.

In 2021, China established a roadmap for the dual carbon goals, push in terminal striving to reach the peak of carbon dioxide emissions by 2030 and achieve carbon neutrality by 2060. Achieving the "dual carbon" goals is both a severe challenge and a major opportunity. The high-quality development of the motor industry can greatly improve energy utilization efficiency, help enterprises transform into low-carbon enterprises, and achieve green, low-carbon and sustainable development.

Under the background of "dual carbon", traditional high-carbon industries such as steel, nonferrous metals, and chemicals have the most urgent need for energy conservation, emission reduction, and consumption reduction. As the driving device of various mechanical equipment such as fans, pumps, compressors, machine tools, and conveyor belts, the power consumption of motors accounts for more than 60% of China's total industrial power consumption. Last year, the "Motor Energy Efficiency Improvement Plan (2021-2023)" was proposed to further strengthen and standardize the implementation of motor energy efficiency standards and energy efficiency market supervision, eliminate inefficient and backward motors, and accelerate the application and promotion of high-efficiency and energy-saving motors, which has a practical driving significance for the implementation of carbon peak and carbon neutrality goals. In 2022, the "dual carbon" work will continue to be vigorously promoted, and energy conservation and emission reduction will still be a very important task for all enterprises. As a key component of motor control and energy conservation and environmental protection, its importance cannot be ignored, and it will surely usher in a broader development space.

Under the national goals of carbon peak and carbon neutrality, improving energy efficiency is a severe challenge faced by all electricity-related industries. As a power source for electrical appliances and other types of machinery, motors are not only widely used in various industries, but also large electricity consumers.

Motors are the single type of equipment with the largest power consumption. According to a recent survey by the International Energy Agency, motor power consumption accounts for about 2/3 of the power consumption in the industrial field and about 46% of the global power consumption. In my country, this data is even more shocking. According to data from the Ministry of Industry and Information Technology, motor energy consumption accounts for more than 65% of the entire industrial energy consumption and 60% of the total national power consumption. For every 1 percentage point increase in motor energy efficiency, about 26 billion kWh of electricity can be saved annually; if the efficiency of the motor system is improved by 5-8 percentage points, the annual power savings are equivalent to the power generation of 2-3 Three Gorges power stations.

On November 22, 2021, the Ministry of Industry and Information Technology and the State Administration for Market Regulation issued the "Motor Energy Efficiency Improvement Plan (2021-2023)" (hereinafter referred to as the "Plan"), proposing to accelerate the promotion and application of high-efficiency and energy-saving motors, including carrying out energy-saving transformation of existing motors and accelerating the elimination of backward and inefficient motors that do not meet the requirements of the current national energy efficiency standards. In addition, it is also emphasized that efforts should be made to increase the application of high-efficiency and energy-saving motors.

Some experts pointed out that the introduction of the "Plan" will bring a vent to the market for permanent magnet motors and inverters that drive permanent magnet motors. The use of inverters is advocated because when inverters and motors are used in combination, energy consumption can usually be reduced by at least 25%.

The core of the "Plan" is to focus on equipment manufacturing, technological innovation, promotion and application, and industrial services, actively implement energy-saving transformation and upgrading and energy system optimization, continuously improve the energy efficiency of motor systems, support energy conservation and efficiency improvement in key industries and fields, and help achieve the "dual carbon" goal.

High-efficiency motors all require inverter control. Therefore, as the application of high-efficiency motors becomes more and more widespread, the market demand for matching inverters will continue to increase, which will undoubtedly inject a shot of adrenaline into the development of the domestic inverter industry and the three downstream industries. On the other hand, in order to achieve high efficiency of motors, motor manufacturers need to cooperate with inverter manufacturers to continuously adapt drivers to improve motor performance and expand the energy-saving space of motor and inverter matching in addition to increasing energy-saving technical reforms. This will further promote the market participation of inverter manufacturers and accelerate the replacement of inverters in the motor stock market.

We believe that as the concept of comprehensive energy saving and consumption reduction and green and sustainable development gradually deepens, 4-row connector companies will surely usher in a golden period of development.