What Are The Maintenance Points Of Cold Press Needle Crimper?
contact crimper is a device widely used in the fields of electricity, communication, etc. Its main function is to connect two or more conductive wire cores through a crimping tube to realize the transmission of electricity or signals. In order to ensure the normal operation of d sub contact crimper and extend its service life, it is necessary to perform regular maintenance (hereinafter referred to as maintenance). This article will focus on the maintenance points of contact crimping tool.
1. Daily inspection
Daily inspection is an important part of the maintenance of the crimping machine. Its main contents include: checking whether the appearance of the crimping machine is intact, without serious wear and deformation, etc.; checking whether each button, switch, indicator light, etc. is working properly; checking whether the crimping tube is clean and free of dirt; checking whether each connection part is firm and free of looseness.
2. Regular cleaning and lubrication
Regular cleaning and lubrication are important measures to keep the crimping machine running well. Dust, dirt and other impurities inside and outside the crimping machine should be cleaned regularly to avoid affecting the normal operation of the machine. At the same time, the various parts of the machine should be lubricated regularly to reduce wear and friction resistance.
3. Check the electrical system
The electrical system is an important part of the crimping machine, so the electrical system should be checked regularly. Specifically include: check whether the wires, cables, plugs, etc. are intact, without damage, aging, etc.; check whether the electrical components are overheated, burnt, etc.; check whether the control panel displays normally and there are no abnormalities.
4. Check the hydraulic system
The hydraulic system is the core part of the crimping machine, so the hydraulic system should be checked regularly. Specifically include: check whether the hydraulic oil is clean and free of impurities; check whether the hydraulic oil is sufficient; check whether the hydraulic components have oil leakage, oil seepage, etc.; check whether the hydraulic pipeline has cracks, falls off, etc.
5. Check the safety protection device
The safety protection device is an important safety guarantee for the crimping machine, so the safety protection device should be checked regularly. Specifically include: check whether the safety valve, pressure reducing valve, etc. are working properly; check the sensitivity and reliability of the safety protection device; check whether the machine's operating handle, buttons, etc. meet the safety standards.
In summary, the maintenance focus of the crimping machine includes daily inspection, regular cleaning and lubrication, inspection of the electrical system, inspection of the hydraulic system, and inspection of the safety protection device. Only by doing these maintenance work well can we ensure the normal operation and extended service life of the crimping machine. At the same time, it can also improve the working efficiency and safety of the equipment and reduce the possibility of accidents. Therefore, relevant staff should strengthen the maintenance of the crimping machine, find and deal with problems in time, and ensure the stable operation of the equipment.
