Specifications Of Common Industrial Connectors

There are many types of Heavy Duty Connector products, and each HM & EMC Connector Insert has its own specific parameters. Some general parameters of connectors are called differently. The general names of the general parameters of HP3A/H Connector Hood & Housing are summarized as follows:

1. Insulation resistance: mainly understood as the resistance value that the insulator between the upper two ends of the connector can withstand.

2. Insertion force: mainly refers to the force required for the male lead of the connector to be inserted into the female socket of the connector.

3. Polarity: mainly refers to the arrangement of the connector terminals and leads, and prohibits inappropriate coupling of plugs and sockets.

4. Surface plating: mainly refers to the surface plating of tin, gold, and bromine on the connection hardware of the connector.

5. Spacing: mainly refers to the center distance between two horizontally adjacent plug-in points of the plug-in part of the connector product. The commonly used unit is millimeter.

6. Hardware material: mainly refers to the material used for the metal parts of the connector. The performance of the hardware material determines the elastic performance of the connector contacts and is a key factor in the quality of the connector.

7. Welding conditions: Generally, connector products will be welded to the circuit board for use. With the improvement and popularization of wave soldering technology, higher requirements are placed on the soldering performance of connectors.