Ukk Junction Box Related Knowledge Introduction

4 pole power distribution block Application: used for indoor and outdoor electrical, communication, fire fighting equipment, steel smelting, petrochemical, electronics, electricity, railways, construction sites, mines, mining sites, airports, hotels, ships, large factories, coastal factories, unloading terminal equipment, sewage treatment facilities, environmental pollution facilities, etc.

2.din rail power distribution terminal blocks Material: Use new materials imported from Taiwan, high-quality thermoplastic plastics ABS or (PC) polycarbonate, or you can choose the material according to the customer's requirements, flame retardant materials, UV protection materials can be customized, and the top cover has two forms of transparent and opaque (materials are non-corrosive, anti-static, and have good insulation)

3.power distribution block 4 pole Box thickness: The average thickness of the thinnest part of the box is 3mm, the thickness of important parts is strengthened (will not deform), impact strength IK07 (cannot be crushed); flame retardant grade V0. (resistant to high temperature baking, long-term use without fading), lightweight (easy to install, and can be moved at will).

4.din distribution block Waterproof performance: electrical power distribution blocks Super waterproof, protection level reaches IP66 or above, even if it rains heavily during operation, water will not enter, very safe.

5. Certification: The product has passed CE certification, power terminal blocks electrical materials can be made (environmental protection, flame retardant, UL materials, etc.), and the waterproof level IP66 certification test has passed.

6.power distribution terminal Installation method: 1. Internal installation-there are bosses inside the box for installing circuit boards or DIN rail components, and built-in copper wiring nuts (each waterproof box is equipped with at least two very conventional M4 copper nuts) 2. External installation-can be directly fixed to the wall through the installation holes at the bottom of the box (can be directly fixed to the wall or board with screws or nails through the four corners of the box.)

7.din power distribution Inlet and outlet holes: You can open holes on it at will according to the customer's use requirements (the opening position and opening size can be processed according to the customer's specified requirements.) After opening the hole, a matching waterproof clamping joint can be installed to achieve the best waterproof effect. (For detailed steps, please refer to the picture below) 8. The service life of the waterproof box is generally about 5 years for conventional materials depending on the use environment. If flame retardants and anti-aging agents [antioxidants] are added to the material, the service life can reach more than 10 years. Heat deformation temperature: -40~~85 degrees.